Main Menu
3-7
3
Rate Limit 3-116
Input Port Configuration Sets the input rate limit for each port 3-116
Output Port Configuration Sets the output rate limit for ports 3-116
Port Statistics Lists Ethernet and RMON port statistics 3-117
Address Table 3-121
Static Addresses Displays entries for interface, address or VLAN 3-121
Dynamic Addresses Displays or edits static entries in the Address Table 3-122
Address Aging Sets timeout for dynamically learned entries 3-124
Spanning Tree 3-124
STA 3-124
Information Displays STA values used for the bridge 3-125
Configuration Configures global bridge settings for STA and RSTP 3-128
Port Information Displays individual port settings for STA 3-131
Trunk Information Displays individual trunk settings for STA 3-131
Port Configuration Configures individual port settings for STA 3-134
Trunk Configuration Configures individual trunk settings for STA 3-134
MSTP 3-136
VLAN Configuration Configures priority and VLANs for a spanning tree instance 3-136
Port Information Displays port settings for a specified MST instance 3-138
Trunk Information Displays trunk settings for a specified MST instance 3-138
Port Configuration Configures port settings for a specified MST instance 3-140
Trunk Configuration Configures trunk settings for a specified MST instance 3-140
VLAN 3-142
802.1Q VLAN 3-142
GVRP Status Enables GVRP on the switch 3-145
802.1Q Tunnel
Configuration
Enables 802.1Q (QinQ) Tunneling 3-157
Basic Information Displays information on the VLAN type supported by this switch 3-146
Current Table Shows the current port members of each VLAN and whether or
not the port is tagged or untagged
3-146
Static List Used to create or remove VLAN groups 3-148
Static Table Modifies the settings for an existing VLAN 3-149
Static Membership by Port Configures membership type for interfaces, including tagged,
untagged or forbidden
3-151
Table 3-2 Main Menu (Continued)
Menu Description Page
To Next Page
Loading...
