Edimax IC-3140W - Page 113

113
Address
notification email.
SMTP Server
Specify the IP address or host name of the
SMTP server for the sender email. Your ISP
can provide this information if you are
unsure.
SMTP port
Specify the port number of the SMTP server
you wish to use here. The default value is 25.
SMTP
Authentication
Enable or disable SMTP authentication. If you
are unsure, check with your ISP.
SMTP Account
If using SMTP authentication (above), then
enter the SMTP account (username) of your
SMTP server here. In most cases, it’s the same
as your POP3 username (the one you use to
receive email). Contact your ISP if you are
unsure.
SMTP Password
Enter the SMTP password of your SMTP
server here. In most cases, it’s the same as
your POP3 password (the one you use to
receive email). Contact your ISP if you are
unsure.