ES-10B 4 Terminal Single Phase Residential Electricity
Meter - Product Guide
Copyright © 2019 EDMI Europe Ltd. All rights reserved
Version / Status: 1.1
Public
Limit range for transportation: -25ºC to 70ºC
IP53 Indoor without suction
Non-condensing
Annual mean: < 75%
Up to 95% for 30days these days being spread in a natural manner over one year
Accurate within 10 seconds of the UTC date and time under normal operating conditions.
On first detection of clock drift, if > 10 seconds an alert will be sent via the
Communication Hub to the supplier for rectification.
Crystal clock drift ±0.5 sec/day as per 7.5.2.2 – IEC 62054-21
Internal battery with up to 1 year of shelf storage
Readable from left/right/top and bottom angles
Backlight for low light conditions
Two navigation buttons (for menu navigation and selection)
Top LED - Active Energy: [imp./kWh]: 1000
Bottom LED - Reactive Energy: [imp./Varh]: 1000
Electronic tamper detection for terminal cove and meter cover interface whilst energized
or de-energized (powered by battery).
Meter cover MID approved tamper evident metrological seals
Provision for wire seals to be used for communication hub and terminal cover.
Commercial Product Assurance (CPA) v1.2 for Electricity Smart Metering Equipment.
Security aspect of Measuring Instrument Directive (MID & WELMEC).
Local optical port - for calibration, configuration or triage
ZigBee Smart Energy Profile 1.2b
DLMS CCT 3.0
GBCS object support v1.1
120mm (H) x 130mm(W) x 65mm (D)
To Next Page
Loading...
