EDT EX-RAY - Program DANGER Temperature Warning

To Next Page

To Previous Page

Data Setting

Program DANGER Temperature Warning:

As motor temperature sensor (Electric or Gas) reaches the value

of this setting, the Right Red LED will turn on as a CRITICAL

warning. Setting to 0 disables the alert. (Factory default = 0°)

MODIFY FLASHING DIGITS BY PRESSING THE

LEFT BUTTON.

TO CONFIRM PRESS THE CENTER BUTTON.

EX-RAY will go to the next screen

CHANGE TO NEXT DIGIT BY PRESSING RIGHT

BUTTON.

Electric Motors: (Typical Settings - do not exceed 85°C)

• WARNING: 65°C (149°F)

• CRITICAL: 75°C (167°F)

Gas Engines: (Suggested warnings, see MFG)

• Spark Plug / Head Temp WARNING: See MFG

• Oil Temp WARNING: 82°C (180°F)

• Coolant WARNING: 99°C (210°F)

• Spark Plug / Head Temp CRITICAL: See MFG

• Oil Temp CRITICAL: 99°C (210°F)

• Coolant CRITICAL: 110°C (230°F)

See MFG = Check manufacturers recommendations

Note: Oil Temp varies depending on quality of oil.

Note: Head temperature and OIL properties, see article:

http://nortonclub.org/docs/OilTemp.pdf