Edwards STP-iXL455

STP-iX455/iXL455 Series Instruction Manual
10-1
Operation
10 STP-Link and Display Unit
The STP-Link (optional accessory) and the display unit iDT-001 (optional accessory) are
available with the STP pump.
10.1 STP-Link
The "STP-Link" is a Windows application for operating the STP pump, confirming the
pump status or setting various settings. Table 10.1 shows the principal functions.
See the Instruction Manual of the "STP-Link" for the detailed specification and
operating method.
Table 10.1 Functions of STP-Link
Item Functions
Operating
function
Start, stop and failure reset operation of
STP pump
Confirmation
function
Operational state of STP pump
Software version
Serial No.
STP pump model
Operation hours
Number of starts
Bearing damage integrated value
Error history
Option setting
function
Remote operation mode setting
Rotational speed setting
Vent valve setting
Warning function setting