STP-iX455/iXL455 Series Instruction Manual
4-16
Installation
4.3.4 Legs for Securing the Base
◇ When making legs to secure the base, make the length of legs 35 mm or less.
Use a material that has a tensile strength of 600 N/mm
2
or more.
◇ When securing the base, use stainless steel securing bolts with a tensile strength
class is 70 or more.
The legs for securing the base are not included. Procure the legs at your company.
It is recommended to make legs in the configuration shown in Figure 4.10.
Figure 4.11 shows the position of the screw holes for the legs.
Figure 4.10 Recommended Leg for Securing Base
Figure 4.11 Position of the Screw Holes for Legs
Screw depth 25
M12
To Next Page
Loading...
