Safety and compliance
Denion of Warnings and Cauons
Important safety informaon is highlighted as WARNING and CAUTION instrucons; these
instrucons must be obeyed.
The use of W
ARNINGs and CAUTIONs is dened below.
WARNING:
W
arnings are given where failure to observe the instrucon could result in injury or death
to people. The actual symbol shown varies according to the hazard.
CAUTION:
Cauons are given where failure to observe the instrucon could result in damage to the
equipmen
t, associated equipment or process.
Safety symbols
The sa
fety symbols on the products denote areas where care and aenon is required.
The following safety symbols may be used on the T-Staon 85 or throughout the product
documentaon.
Warning/Cauon
An appropriate safety instrucon should be followed or cauon to a potenal
hazard exists.
Warning - Dangerous Voltage
Indic
ates hazards arising from dangerous voltages.
Warning - Hot Surfaces
Indic
ates that the marked item may be hot and should not be touched
without taking precauons.
D395-94-880A - Safety and compliance
Page 9