EE 4GEE Capture Cam - Recording videos; Managing photos and videos

11
To specify the photo shot mode you’re using on the camera, use the 4GEE Action Cam app
installed on your mobile phone for selection. For detailed instructions, please refer to
“Your
4GEE Action Cam app (compatible with your 4GEE Capture Cam)” on page 12
and
“Taking
photos” on page 23
.
1. Move the Toggle switch to
Photo
.
2. Press the Power button/status light to take photo(s).
Recording videos
Note:
If you wish to preview your video before recording videos, use the 4GEE Action Cam
app (compatible with your 4GEE Capture Cam) installed on your mobile phone. For detailed
instructions, please refer to
“Your 4GEE Action Cam app (compatible with your 4GEE Capture
Cam)” on page 12
.
Note:
To watch the videos recorded, use the 4GEE Action Cam app installed on your mobile
phone or transfer files to your computer. For detailed instructions, please refer to
“Managing
photos and videos” on page 11
and
“Transferring camera files to a computer” on page 33
.
By default, your camera is set to record video in normal mode. Your camera also allows you to
record videos using the following video modes.
• Time-lapse: Capture continuous shots at the preset interval time and save them into one
video automatically. The recorded video is played back in fast motion, producing a time
passage effect, such as traffic flow, sunrise/sunset, plant growth, etc.
• Video loop: Enable this function to record videos continuously and saved in separate files
with specified time segments. Once the internal or the microSD card storage is full, the
saved video loops will be overwritten with new ones until you manually stop loop recording.
To specify the video mode you’re using on the camera, use the 4GEE Action Cam app installed
on your mobile phone for selection. For detailed instructions, please refer to
“Your 4GEE Action
Cam app (compatible with your 4GEE Capture Cam)” on page 12
and
“Recording videos” on
page 24
.
1. Move the Toggle switch to
Video
.
2. Press the Power button/status light to start recording. The Power button/status light
turns solid blue
.
3. Press the Power button/status light again to stop recording.
Managing photos and videos
To view or share the photos and videos captured with your camera, use the 4GEE Action Cam
app (compatible with your 4GEE Capture Cam) installed on your mobile phone, or transfer the
files to your computer. For detailed instructions, please refer to
“Your 4GEE Action Cam app
(compatible with your 4GEE Capture Cam)” on page 12
and
“Transferring camera files to a
computer” on page 33
.
Note:
Playback performance of the videos on your computer may vary depending on the
operating system, CPU and the media player you use.