EE 4GEE Capture Cam - Before you start; Important safety information

2
Before you start
Please read the following important safety instructions carefully before using your
4GEE Capture Cam (hereinafter called “camera”).
WARNING:
Failure to observe these instructions may result in personal injuries or damage to
this camera.
Important safety information
• Observe all laws, regulations and common safety practices while using this camera. To
reduce the risk of accidents, please do not use while driving.
• Do not use the camera where prohibited.
• Do not place this camera under direct sunlight or near heat sources, such as in a closed car
under sunlight or near a stove. The outer casing of this camera may become deformed and
the sophisticated components inside may become damaged due to excessive heat.
• Do not use this camera near water, in the rain or allow any liquid to get inside this camera.
Water and moisture may cause the electronic components to short circuit and lead to a
malfunction.
• Do not use this camera near strong electromagnetic sources, such as a microwave oven. The
electromagnetic interference may cause this camera to malfunction.
• Do not drop or apply shock/vibration to this camera. Strong impacts may damage the
components inside.
• Standard 5V/1A charging head required. The power adapter shall be certified according to
IEC/EN 60950-1 and fulfilled the requirement of SELV and LPS. Connecting this camera to a
power adapter that does not meet the above requirements is very dangerous and may lead
to fire or explosion.
• Do not cut, bend, modify, place heavy objects, or step on the USB cable. Otherwise the
external insulation may be damaged and result in short-circuit or fire.
• If there are strange odours or heat emitting from this camera or any signs of malfunction,
disconnect this camera from the power immediately and contact EE for an inspection or
service.
• If a foreign substance or water gets in this camera, turn the power off immediately and
disconnect the power adapter. Then contact EE to arrange a service.
• Do not attempt to disassemble or modify this camera. There are no user serviceable parts
inside this camera, and unauthorised modifications will cause the warranty to void.
• Use this camera in environmental temperatures between 0 °C to 35 °C.
• Keep good ventilation during charging. Do not cover the power adapter with paper or
objects that will reduce cooling.
• Connect the power adapter to a proper electrical outlet and power source. The voltage
requirements are found on the product packaging.
• Do not use the power adapter in a highly humid environment.
• Never touch the power adapter with wet hands.
• Do not attempt to repair the power adapter. Replace the power adapter if it is damaged or
exposed to excessive moisture. Contact EE or head to your nearest store for help.
• The maximum operational ambient temperature (TMA) as specified by the manufacturer is
35 °C.