32
Note:
After changing the device, your phone will automatically be disconnected from the
camera. Go to WiFi settings on your phone, select your new device name from the list, enter
your current password, then select “Connect”.
Note:
To check your device name if forgotten, scroll to
Product name
.
Checking your camera’s firmware version
Scroll to
Firmware version
.
Formatting
Performing this action will erase all your stored data from your camera’s internal storage or the
microSD card storage.
WARNING:
This operation is irreversible. Consider backing up photos/videos captured to your
computer or a secondary storage device first.
Note:
To format the micorSD card storage, a valid microSD card must be inserted in your
camera.
• To format the microSD card storage, touch
Format SD card
>
Format
.
• To format your camera’s internal storage, touch
Format storage
>
Format
.
Resetting your camera settings to default
Performing this action will restore your camera to its factory state, including the WiFi password,
and erase all your user settings from your camera’s internal storage.
Warning:
This operation is irreversible.
Touch
Reset Setting to default
>
OK
to confirm and reset your camera.
Updating your camera
When your camera has a mobile data connection, it automatically checks and starts
downloading the update package for system updates and notifies you on the main screen of
the app.
WARNING:
Before updating your camera, ensure that your camera has sufficient space to
download the update package, you have backed up your camera’s important data to your
computer or a secondary storage device, and your camera has a strong mobile data connection.
After the update package is downloaded, a message displays on the main screen of the app
asking whether or not to update your camera now. Touch
Update now
to update the system,
then your camera automatically restarts.
To Next Page
Loading...