31
Resetting the WiFi password
If you have changed or forgotten the WiFi password for your 4GEE Action Cam app, you can use
this option to reset it back to default.
1. Touch
Reset wifi password
.
2. Touch
OK
for confirmation.
Note:
After resetting the WiFi password, your phone will automatically be disconnected from
the camera. Go to WiFi settings on your phone, select “4GEE Capture Cam XXXXX” then select
“Forget”. Select “4GEE Capture Cam XXXXX” again from the list, enter the default password
(default: 00000000) then select “Connect”.
Note:
If required you can use your camera to restore your camera to its factory state including
the WiFi password. However, all your stored data will also be erased. For detailed instructions,
please refer to
“Resetting your camera” on page 12
.
Checking the storage
Scroll to
SD card space
/
Storage space
to check the total and free storage available in the
microSD card and internal storage.
Note:
To check the micorSD card storage, a valid microSD card must be inserted in your camera.
Emergency SMS
Edit emergency SMS contents and add designated people from your contacts.
1. Touch
Emergency SMS
.
2. Touch
. Select up to three receivers from your contacts.
3. Touch the blank text field and start typing contents. Touch “Done” when you’re finished.
4. Touch
Save
.
After adding emergency contacts, you can send an emergency SMS whenever needed. For
detailed instructions, please refer to
“Sending an emergency SMS” on page 12
.
Change device name
Your device name is set to 4GEE Capture Cam XXXXX by default, which is also the name
displayed on the WiFi list. You can use this function to change the device name.
1. Touch
Change device name
.
2. Enter the new device name, then touch
OK
.
To Next Page
Loading...