EE 4GEE Capture Cam - EC Declaration of Conformity

37
EC Declaration of Conformity
Hereby,
Name of manufacturer: BenQ Corporation
Address: 16 Jihu Road, Neihu, Taipei 114, Taiwan
City: Taipei 114
Country: Taiwan
declares that this equipment:
Product description: Camera
Type designation(s): 4GEE Capture Cam
Trademark: EE
is in compliance with the essential requirements and other relevant provisions of Directive
1999/5/EC
1. Health (Article 3.1(a) of the R&TTE Directive)
• EN 62209-2:2010, EN 50566:2013/AC: 2014
2. Safety (Article 3.1(a) of the R&TTE Directive)
• EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013
3. Electromagnetic compatibility (Article 3.1 (b) of the R&TTE Directive)
• EN 301 489-1 V1.9.2, EN 301 489-3 V1.6.1
• EN 301 489-17 V2.2.1, EN 301 489-24 V1.5.1
• EN 55022:2010+AC:2011, EN 55024: 2010
• EN 61000-4-3:2006+A1:2007+A2:2010
4. Radio frequency spectrum usage (Article 3.2 of the R&TTE Directive)
• EN 301 908-13 V6.2.1, EN 301 908-1 V7.1.1
• EN 301 908-2 V6.2.1, EN 300 328 V1.8.1
• EN 300 440-2 V1.4.1, EN 300 440-1 V1.6.1
We hereby declare that the above named product is in conformance to all the essential
requirements of the Directives:
R&TTE Directive (1999/5/EC)
All the reports of the applied standards under R&TTE Directive have the Positive Opinion of
Notified Body:
Telefication B.V., Edisonstraat 12A, 6902 PK Zevenaar, The Netherlands
Identification mark:
0560
(Notified Body)
CE
The technical documentation relevant to the above equipment will be held at:
BenQ Corporation
16 Jihu Road, Neihu, Taipei 114, Taiwan