EFI E-43A - REMOVING THE E-43 A FROM THE FURNITURE

SERVICING THE E-43A WITH FURNITURE 118
REMOVING THE E-43A FROM THE FURNITURE
Never lift the E-43A by grasping the top panel. The top panel does not support the weight of
the system.
1 Make sure that the E-43A is shut down and that all the cables are removed from the back of
the E-43A.
2 Remove the cable cover and disconnect the two monitor cables (power and video):
• Power from the back of the monitor and from the wall outlet
•
Video from the back of the monitor and from the back of the E-43A
Video cable
Cable cover
Power cable