EFI E-85 User Manual

Color Controller E-85
Installation and Service Guide
A guide for service technicians
Replacement parts and specifications are subject to change.
For the most current parts list, contact your authorized service/support center.

EFI E-85 Specifications

General

Brand	EFI
Model	E-85
Category	Controller
Language	English

Summary

System Startup and Configuration

Starting the E-85 for the First Time

Instructions on powering on the E-85 using the power switch and button.

Static IP Address Configuration

Steps to configure a static IP address via the operational panel or Fiery QuickTouch.

Completing the Installation

System Management

Starting, Stopping, and Rebooting

Replacing Parts

Accessing Internal Components

Board Replacement

Procedures for replacing printer interface, graphics, and motherboards.

Component Replacement

Backup and Restore Procedures

Backup Methods and Recommendations

Restore Procedures

Covers restoring system config, using Fiery System Restore, Installer, and bootable media.

Installing System Software

Reinstallation from DVDs and Pre-installation Checks

Issues during DVD reinstallation and necessary pre-installation tasks.

Software Installation and Verification

Using Fiery System Installer, verification steps, and post-installation actions.

Troubleshooting

Initial Troubleshooting Steps

Covers troubleshooting process, site checkout, and cable/component checks.

Error Messages and System Problems

Addresses error messages, system issues (DVD, clock, performance, network, printing).