89Installation and Service Guide: Color Controller E-85
Performing Backup and Restore
Restoring the system configuration
You can restore the system configuration of the E-85 to its previous state using a previously-saved system configuration
file. For more information about the system configuration file, see page 88.
If you could not save a system configuration file, you must configure Setup. After you exit Setup and the E-85 reboots, ask
the site administrator to restore any archived settings and files. For more information, see Configuration and Setup, which
is part of the user documentation set.
To restore the system configuration from Command WorkStation
1 Launch Command WorkStation and connect to the E-85 with Administrator privilege.
The default Administrator password is
Fiery.1 (case-sensitive), but the site administrator may have changed the
password.
2 From Server menu, select Device Center. In Device Center window, select Tools > Backup & Restore.
3 In the Backup & Restore dialog box, select Restore > Next, and then select the item you want to restore. Click Next.
You can specify the backup file using the Browse button, or you can select a recent backup.
4 Select items to restore and click Next.
5 Click Finish.
To restore the system configuration using Configure
1 Start a web browser and access the E-85 by entering the server name or IP address of the E-85.
2 In WebTools, click Configure icon on the left side.
3 Log on with Administrator privileges and click OK.
The default Administrator password is
Fiery.1 (case-sensitive), but the site administrator may have changed the
password.
4 On the left side, select Fiery Server > Restore.
5 Select the reference file and data file. Click Next.
For more information, see page 88.
6 Select settings to restore and click Next.
7 Click Reboot.
Using Fiery System Restore
Fiery System Restore allows you to create a backup of the E-85 for quick recovery later when any problem happens. You
can restore the E-85 either from images stored on the local hard disk, or from a bootable USB drive. Fiery System Restore
also provides the feature of creating the scheduled backups. You can access the Fiery System Restore from the WebTools
Home tab.
To Next Page
Loading...
Need help?
General
