17Installation and Service Guide: Color Controller E-85
Installing hardware
4 Remove the media pack from the accessory kit and check it for damage.
5 Carefully lift the E-85 out of the box.
Connecting the E-85
Before you connect the E-85, it is strongly recommended that you review all “Precautions” on page 10 to avoid injury or
damage to the E-85. You must connect the following to the E-85:
• Power cable
• Network cable
• Crossover Ethernet cable (lower RJ-45)
• Scan crossover cable
• Monitor cable (option)
• Wireless adapter for keyboard and mouse (option for furniture)
To Next Page
Loading...
