34Installation and Service Guide: Color Controller E-85
Using the E-85
Main tab
The Main tab is displayed as the starting point. It summarizes waiting and printed jobs and displays paper tray status and
other information.
PrintMe tab
The PrintMe tab allows you to submit print jobs using Document IDs if you have a PrintMe subscription. For more
information, see Printing Guide.
Note: PrintMe cloud printing must be enabled in Configure for the PrintMe tab to display in the menu.
Job List tab
The Job List tab on the printer touch panel provides access to jobs according to the status of the job, similar to the Active
and Printed Jobs windows in Command WorkStation. The lists are as follows:
To change from one list to another, press the desired tab at the bottom of the printer touch panel.
On each of these lists, you can scroll up and down one line at a time, or advance to the top or bottom of the job list. Select
a job, and choose the appropriate button to Print, Print and Hold, Delete, or display the Properties of the job. On the
Properties tab, you can change the number of copies, but not any other job properties.
Suspend Printing Suspend print activity between the E-85 and the printer. Use this command to interrupt
the current E-85 job, for example, to perform maintenance tasks. Jobs continue to
process on the E-85. After you complete maintenance tasks, choose Resume Printing to
continue printing jobs from the E-85.
Resume Printing Resume print activity between the printer and the E-85 after you select Suspend Printing.
Active Jobs currently waiting to print.
Held Held jobs.
Printed Printed jobs.
Secure Allows you to log on to display secure print jobs.
To Next Page
Loading...
Need help?
General
