Commissioning
7.3 Description of OSD menu
SCD 19102 / SMD 19102
Instruction Manual, 10/2011, A5E01588521A-004
51
Main menu Function Adjustment/range Description
ADC calibration Execute Automatically calibrate A/D
converter for the applied
video level
The video level range of the
system is checked, and the
display set accordingly. This
results in optimum
adjustment of the individual
RGB A/D converters to the
video source.
The calibration results in a
larger and more flexible
video level range (e.g., the
full brightness is also
achieved at 700 mV if the
video level is limited at this
value).
Note
A specific test pattern and
timing are prerequisites!
The A/D converters have
already been factory-set and
need not be readjusted.
DVI enhancer Enhances the DVI-D signal
quality over long distances,
even when standard cable is
used
To Next Page
Loading...
