elco Firebird FB 2 K LN - Coil Replacement; Capacitor Replacement

MAINTENANCE
53/64
EN
6.4.5 Replacing the coil
The pump coil is designed and built to withstand temperatures of up to 85°C. In the event of
malfunctions or faults, replace the coil using the following procedure:
– remove the connector (1)
– remove the nut (2) using the key supplied
– slide off the coil (3) and replace it
1
2 3
Fig. 52
– ret the components, reversing the procedure above.
6.4.6 Replacing the capacitor
Proceed as follows to replace the capacitor:
– detach the electrical connection from the capacitor (1)
– remove the capacitor (2) and replace it
21
Fig. 53
– ret the components, reversing the procedure above.