6
GETTING STARTED
R
2.3 Rear connections
2.4 Control panel
Your Viscometer is controlled
a
using the five buttons on the control panel on the front of the
Viscometer head.
a. Viscometer models RV2 can be connected to a PC and controlled remotely via the supplied ViscosityMaster
software - see the instructions supplied with the software.
Power
on/off
switch
Power
supply
socket
PT 100
probe
socket
RS 232
interface
ENTER
UP
DOWNSTOP
START
Increase /
decrease
speed and
modify setup
functions
Start /
stop
motor
Enter setup screen
2300_TMA_0377_00_01.book Page 6 Thursday, March 29, 2007 1:32 PM
To Next Page
Loading...
