9
GETTING STARTED
R
2.6 Fitting the spindle guard
The spindle guard supplied with your Viscometer has two
functions:
• It provides physical protection for spindle types L and R.
• It allows accurate measurements to be taken with the large
spindles (L1 and R1, R2, R3).
Use of the spindle guard with spindles other than the L1 and R1,
R2, R3 is optional.
To fit the spindle guard, attach the guard to the Viscometer head
using the knurled screw.
2300_TMA_0377_00_01.book Page 9 Thursday, March 29, 2007 1:32 PM
To Next Page
Loading...
