Elcometer 456 User Manual

English
These instructions apply to the following
Elcometer 456
2
models:
• Ferrous (F)
• Non-Ferrous (NF)
• Dual Ferrous/Non-Ferrous (FNF)
Equipment described in these instructions is
covered by the following Patents:
FNF UK Patent No: GB2306009B
FNF US Patent No: 5886522
F1 2 UK Patent No: 2367135B
F1 2 US Patent No. US 6,762,603
F1 2 German Patent Pending
This product meets the emc directive
89/336/EEC, amended 92/31/EEC and
93/68/EEC.
and are registered
trademarks of Elcometer Instruments Ltd.
All other trademarks acknowledged.
© Copyright Elcometer Instruments Ltd. 2004-2005.
All rights reserved. No part of this Document may be
reproduced, transmitted, transcribed, stored (in a
retrieval system or otherwise) or translated into any
language, in any form or by any means (electronic,
mechanical, magnetic, optical, manual or otherwise)
without the prior written permission of
Elcometer Instruments Ltd.
Doc.No. TMA-0302 Issue 02
Text with Cover No: 18612
Op_456_2_English.book Page 0 Friday, February 17, 2006 3:35 PM

Elcometer 456 Specifications

General

Model	Elcometer 456
Category	Coating Thickness Gauge
Power Supply	2 x AA batteries
Interface	USB, Bluetooth
Data Output	USB, Bluetooth
Measurement Principle	Magnetic Induction or Eddy Current (depending on probe)
Substrate	Ferrous or Non-Ferrous (depending on probe)
Units	µm, mils
Operating Temperature	-10°C to 60°C (14°F to 140°F)
Standards	ISO 2178, ISO 2360, ASTM B499, ASTM D7091
Display	LCD