Elcometer 456 - Probe interchangeability; Personalised Welcome Screen

36
7.4 Probe interchangeability
The following table shows which probes can be used in
the three types of Elcometer 456
2
Gauge.
* indicates probes available for integral type gauges.
Probe type Gauge Type
FNFNF
FERROUS
F1 * 989
F2 * 989
F1 2 * 989
F3 * 989
F1 right angle 989
F2 right angle 989
F1 2 right angle 989
F1 telescopic 989
F2 telescopic 989
F1 PINIP™ 989
F2 PINIP™ 989
F1 2 PINIP™ High Temp 989
F3 PINIP™ 989
F3 miniature straight 989
F3 miniature 45° 989
F3 miniature 90° 989
NON-FERROUS
N1 * 899
N2 899
N1 right angle 899
N1A anodiser’s 899
N1 PINIP™ 899
N3 miniature straight 899
N3 miniature 45° 899
N3 miniature 90° 899
DUAL
FNF1 * 889
FNF1 right angle 889
FNF PINIP™ 889
Op_456_2_English.book Page 36 Friday, February 17, 2006 3:35 PM