Elcometer 456 User Manual

2
7 Probes ................................................................ 35
7.1 Ferrous (F) probes . . . . . . . . . . . . . . . . . . . . . . . 35
7.2 Non-ferrous (N) probes . . . . . . . . . . . . . . . . . . . . 35
7.3 Dual ferrous/non-ferrous (FNF) probes . . . . . . . 35
7.4 Probe interchangeability . . . . . . . . . . . . . . . . . . . 36
7.5 F1 2 probes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
7.6 F1 2 High temperature PINIP™ probes . . . . . . . 37
7.7 Coatings on galvanised or metallised steel . . . . 37
8 Personalised welcome screen ......................... 38
9 Storage and transit............................................ 39
10 Maintenance....................................................... 39
11 Statistics terminology ....................................... 40
12 Technical data.................................................... 41
13 Accessories ....................................................... 43
14 Related equipment ............................................ 45
15 Fitting the wrist harness ................................... 45
16 Probe measurement performance ................... 46
17 Probe capabilities.............................................. 47
18 Error messages ................................................. 54
19 Index ................................................................... 56
Op_456_2_English.book Page 2 Friday, February 17, 2006 3:35 PM

Elcometer 456 Specifications

General

Model	Elcometer 456
Category	Coating Thickness Gauge
Power Supply	2 x AA batteries
Interface	USB, Bluetooth
Data Output	USB, Bluetooth
Measurement Principle	Magnetic Induction or Eddy Current (depending on probe)
Substrate	Ferrous or Non-Ferrous (depending on probe)
Units	µm, mils
Operating Temperature	-10°C to 60°C (14°F to 140°F)
Standards	ISO 2178, ISO 2360, ASTM B499, ASTM D7091
Display	LCD