44
13.6 Coated thickness standards including
certificate
13.7 Probe placement jig
To aid probe positioning on small components a probe
placement jig is available and an adapter suitable for use
with the full range of miniature probes is also available
as an accessory.
13.8 Probe adapters
13.9 Infrared portable printer
13.10 Bench Stands
13.11 PC Connection Cable
Note: A 9-pin to 25-pin adapter may be required for certain
PC RS232 ports.
Ferrous Standard (4 Values): T995111261
Non-Ferrous Standard (4 Values): T995111271
Ferrous Standard (2 Values): T995166001
Non-Ferrous Standard (2 Values): T995166011
Probe placement jig: T95012880
Jumbo Hand Grip (F and N probes): T9997766-
Jumbo Hand Grip (FNF probes): T99913225
V Adapter for pipes (F & N probes): T9997381-
V Adapter for pipes (FNF probes): T99913133
Infrared Portable Printer: X45613877
Thermal Printer Paper: T99913878
Integral Probe Version: T45616161
Integral/Separate Probe Version: T45616162
456 to PC Connection Cable (9-pin): T45616217
Op_456_2_English.book Page 44 Friday, February 17, 2006 3:35 PM
To Next Page
Loading...
