23
“Reset Flight Num. to 1?”: This line allows you to reset the flight number back to one. Previous flight data
files will not be deleted. The MVP will only delete old data files when necessary to make room for new ones.
The password is required to reset the flight number.
5.2 “Voice and Display Controls” Screen:
This screen allows you to control and/or set the following warning and display functions:
“Voice Warning Control” Section:
“External Voice Switch is”: This field shows the current
position (On or Off) of the External Voice Switch (a good
troubleshooting tool).
“Volume Level”: This field allows you to set the volume
level for the voice warnings.
“Test a voice file” Section:
This section allows you to play any one of the voice files
stored in the MVP.
“Display Controls” Section:
This section allows you to set the method for controlling the MVP display intensity. An “External” setting
allows E.I.’s optional CP-1 Intensity Control Pot to adjust the MVP display intensity to any desired level. An
“Auto Dimming” setting allows the electric eye on the front of the MVP case to automatically adjust the
MVP’s display intensity according to the current ambient light level.
“Button Controls” Section:
The MVP has three Aux Digital Inputs that may be use to remote control the Select knob, Exit button and
Screen button.
5.3 “Screens Button Setup” Screen:
The Screens button (found on the front of the MVP) provides a
quick way to switch between the screens you use most often.
Place an “X” in the box for each screen you would like displayed
when you push the Screens button. The fewer screens selected
the more convenient the SCREENS button operation will be.
To Next Page
Loading...
Need help?
General
