3. Arming and Disarming
18
iConnect User Manual
For combination arming of unpartitioned systems, activate the first arming mode, and,
while the exit delay of the first arming mode is counting down, activate the second
armingmode.Itisnotimportantwhicharmingmodeyouchoosefirst.
ItisnotpossibletoactivateFullandPartarmingmodessimultaneously.
Itisnecessarytodisarmfirstwhenchangingfromonearmingmodetoanother
armingmode.
Partitioned Systems
Inpartitionedsystems,allthearmingmodesareindependentofoneanotherandoffull
arming. Youcan arm ordisarm the whole systemand eachpartition no matter whatis
thestateoftheotherpartition.
Forced Arming
Forcedarmingenablesyoutoarmwhenthesystemisnotready.Forexample,ifadoor
protectedbya magneticcontactis open,youmay armthesystemon conditionthatthe
door will be closed by the end of the Exit delay. If the door is still open after the exit
delayexpires,analarmisgenerated.
Forcedarmingisavailableonlyiftheoptionisenabledinprogramming.
Instant Arming
Instant arming is a feature that allows you to cancel the entry delay after Part or
Perimeter,orPartitionarmingthesystem.Forthisfeaturetofunction,itmustbeenabled
inprogrammingbyyourinstaller.
Toinstantlyarmthesystem.
1. Checkifthesystemisreadytoarm.
2.
PressthePartorPerimeterarmingbuttononthekeypad(enteryouruser
codeifrequired).
3. PressandholddownonyourkeypaduntilthemessageInstantArming,OK?
isdisplayed.
4. Press;theentrydelayforthecurrent armingperiodiscanceled.
Supervised Arm
Supervised Arm is an optional feature designed to supervise intrusion sensor activity
beforeyouarmthesystem.
If Supervised Arm is enabled in programming and the system has not received a
transmissionfromasensorforacertainamountoftime,allarmingmethodsthatinclude
thatsensorshallnotbe
available.
Inthiscase,presstocheckwhich sensoriscausingthe“SystemNotReady”condition.
Tomaketherequiredarmingmethodavailable,activatethesensor.Ifactivatingthesensor
doesnothelp,theremaybeaproblemwiththesensor.Youcanbypassthefaultysensor’s
zone to
allow system arming until the problem is remedied – see p. 30,
7.2. Zone
Bypassing/Unbypassing.
To Next Page
Loading...
