Eliwell Memory 1000 - Settings - General Menu; Suspend; Rec On;Off

9MA10011 10/52
EN12830
<=24h/30s
<=24h
<=7dd
Storage
>7dd
OUTSIDEEN12380
Furthermore,ifthedevicehasonboardinputs,thefollowingwillbedisplayed:
• TheactualnumberofAnalogueInputs.
• TheactualnumberofDigitalInputs.
It is also strongly recommended to set the access passwords.
Levels of visibility
Threepasswordlevelscanbesetexclusivelyfromthe5.8PASSWORDSmenu.
5.8 PASSWORDS
PSWREC 0
StandardPSW 0
AdvancedPSW 99
• TheRECPSW(range0…255)allowsyoutoprotectthestartorsuspensionof
datalogging.
• The standard PSW (range 0…255) allows you to restrict access to the ‘Std.
Conguration’menu.
• TheadvancedPSW(range0…65535)allowsyoutorestrictaccesstothe‘Adv.
Conguration’menu.
N.B.:Defaultvalues=0forallthreepasswords.
Intheexample, theAdvancedPSWis set to99.Obviously the 3passwordscan
allbedifferent.
Ifyouprefer,youcanrestrictaccesstomenu5Adv.Congurationwitha
password.ThenonlyanAdvancedPSWholderwillbeallowedaccesstobeable
tomodifyallthreepasswords.

2.4 Settings - General Menu
Access to system information is organised into menus.
Access to each individual menu is explained below (or in the sections
indicated).
2.4.1 0 – Suspend
0 PRINT
Suspended
The0–Suspendmenuallowsyoutosuspendacurrentprintjob.
PresstheOKkeytosuspendaprintjob.
ThePrintLEDwillswitchoffifitwason.
2.4.2 1 – Rec On/Off
1 REC ON/OFF
1.0 RECon
1.1 Recoff