Eliwell Memory 1000 - System Information

9MA10011 11/52
The 1 – RecOn/Off menu allows you to start or suspend data logging for I/O
resources.
Themenuispassword-protected-seethesectiononhowtosetthePassword.
NOTE:Somefunctions/sectionsinthefollowingmenusarenotmodiablewhen
dataloggingisunderway.Thefollowingmessagewillappearinthiscase:
SetREC=Off
Tomodify
IMPORTANT!: if REC = Off and if no keys have been pressed for more
than 15 minutes , I/O resources recording will activate (REC = On)
automatically at the current settings in the controller.
2.4.3 2 – Data
SeePrintersection.
2.4.4 3 – Alarms
SeeAlarmssection.
2.4.5 4 – Std. Conguration
SeeStandardCongurationsection.
2.4.6 5 – Adv. Conguration
SeeAdvancedCongurationsection.
2.4.7 6 - System Information
 6 SYSTEM INFO
Partnumbers 148
Softwareversion
Releasedate dd/mm/yy
OperatingSystem
TotalMemory Kb
Freememory %
Menu6-SystemInformationisread-onlyandprovidesgeneralinformationon:
• Partnumbers.
• Softwareversion.
• Releasedateofsoftwareversion,indd/mm/yyformat.
• VersionofOperatingSystem.
• TotalmemoryinKb.
• Totalfreememoryasapercentage.
• Serialnumber.