Eliwell Memory 1000 - Units

9MA10011 20/52
• First address: set the value for the last address assigned to devices in the
network.
NOTES:
• Networkcongurationisautomatic.
• When adding or removing instruments from the network, repeat the self-
congurationprocedure.
• A number of messages conrming successful or failed network recognition/
conguration,andanyerrormessageswillbedisplayed.Followtheinstructions
onthedisplay.
• Oncompletionofconguration,menu4.5.1willnolongerbeaccessible.
4.5.2 Not used
4.5.3 Not used
4.5.4 General Info
Read-only menu to view the number of devices found in the network and the
AnalogueInputsreadbythenetwork.Example(4devicesand6Inputs(3thefirst
–seeDeviceAnalogueInputssection,2thesecond,1thethird):
4.5.4 NETWORK1GENERAL
Totalno.ofunits 4
Inputsenabled 6
4.5.5 Units
Menu showing the List of Devices, and giving the names of Compatible Televis
DevicesconfiguredforNetwork1.
4.5.4 NETWORK 1 UNITS
00.01 N1-F.0-D.1
00.02 N2-F.0-D.2
00.03 N3-F.0-D.3
00.04 N4-F.0-D.4
EachelementintheListofDevicesincludestheNameoftheDevice(exampleNx)
andtheTelevisaddressinformatTelevis(F:D).
Select the required Device (example 00.01) using the Up and Down keys and
pressOK.
Amenuwillopenlistingthefollowing:
4.5.4 NETWORK 1 UNITS
UnitIndex 01/04
Address 0:1
Unitmanaged SI
Name
Alarm1output 1
Probeinfo >>>