Responsibilities ANSI/ASSE A10.31 EEC-0168 V1.0
Responsibilities per
ANSI/ASSE A10.31
Running torque
Rotation speed in RPM at rated hydraulic flow
Rated hydraulic flow
Rated hydraulic pressure
d. Design Voltage and Qualification Voltage: If the digger derrick is the
insulating type, the manufacturer shall state the design and qualification
voltage in the manual, and the qualification voltage on the identification
plate(s).
NOTE: ANSI/ASSE A10.31, Section 5 details the procedures for
electrical requirements.
C. Quality Assurance: The manufacturer shall have a documented quality
assurance program that will ensure compliance with this standard.
D. Manuals: The manufacturer shall provide a separate operator’s manual and a
separate parts/maintenance manual for each digger derrick. Two hard copies of
the operator’s manuals shall accompany each digger derrick. Two parts and
maintenance manuals, either hard copy or electronic format, shall be provided for
each digger derrick. The manuals shall contain:
1. Descriptions, specifications and ratings of the digger derrick
2. Operating instructions for the digger derrick and its auxiliary systems
3. Precautions relating to multiple configurations such as personnel platforms,
jibs, etc.
4. Instructions regarding routine and frequency of recommended maintenance
5. Replacement part information
6. Instructional markings, per the Instructional Markings section on page 4.
7. Facsimiles of all safety and operating decals and their location
8. Notice of the requirement of dealers, installers, owners, users, operators,
lessors, lessees, and brokers to comply with the appropriate section(s) of this
standard
E. Markings: The digger derrick shall have identification, operation, and instruction
placards, decals, plates or the equivalent, which are legible and readily visible. In
To Next Page
Loading...