Elmo MX-P2 - Viewer Software and Installation; Viewer Software Options

20
If your computer does not meet the recommended requirements or depending on the
performance of your computer, the recording frame rate may be decreased.
➎ ABOUT VIEWER SOFTWARE
●Image Mate +C
The following operations can be performed by accessing the WEB app “Image Mate +C” on the
internet after connecting the product to a computer via the USB cable:
- Save live video streaming or still images to a computer
- Draw on the image
- Operate the product from a computer (such as zoom, freeze and image rotation)
For details about how to access the “Image Mate +C”, visit the following website.
https://www.elmousa.com/imagematecloud/
●Image Mate 4
The following operations can be performed by connecting the product to a computer with Image
Mate 4 installed via the USB cable:
- Save live video streaming or still images to a computer
- Operate the product from a computer, etc.
※If Image Mate 4 is already installed in your computer, update the version of Image Mate 4.
※You can view the camera image with a commercially available software. With Image Mate 4,
you can also use other functions such as zoom and freeze.
For details of the control software Image Mate4 and its instruction manual, visit the following
website.
https://www.elmoeurope.com/index.php/en/products/software-choice/elmo-image-mate-4
●EIT
The following operations can be performed by connecting the product to a computer with our
touchscreen electronic blackboard software “EIT (ELMO Interactive Toolbox)” installed via the
USB cable and by connecting the computer to a large monitor or tablet computer:
- Operate the product or enlarge the computer screen
- Draw on the image
- Save live video streaming or still images to a computer
For details of the EIT (ELMO Interactive Toolbox), visit the following website
https://www.elmousa.com/software/
https://www.elmoeurope.com/index.php/en/products/software-choice/elmo-interactive-toolbox
NOTE