Elmo MX-P2 - Product Specifications; Main Camera Specifications; Functional Specifications

24
➐ SPECIFICATION
■MAIN CAMERA
Item
Specifications
Power source
DC5V
Power consumption
4.0W（when connecting USB）
6.0W（when connecting HDMI/RGB）
Outside dimensions
W：343mm D：82mm H：302mm(When setup)
W：290mm D：82mm H：22mm(When folded)
Weight
Approx. 500g（Main body only）
Ext. control terminal
USB3.0 type microB × 1
Lens
F=2.0
Frame rate
60fps（in high frame rate mode at 1080P）
Focus working range
From lens surface：100mm ～ ∞
Focus
Auto（One-push）
Exposure
Auto (Possible to adjust exposure level)
Image pick-up
element
1/3.1 inch CMOS 13,000,000 pixels
Effective pixels
H：4160, V：3120
Resolution
H：1300TVlines or more V：1300TVlines or more
Digital zoom
Max. 16x
Shooting area
374mm×281mm（Height：286mm） 4：3
Simultaneous output
Possible from each port (USB/HDMI OUT/RGB OUT）
※For details about the conditions for the simultaneous output,
refer to “Status LED”(⇒P.12).
■FUNCTIONAL SPECIFICATION
Item
Specifications
Operating
panel
IM+C
IM4
EIT
Brightness
Possible(Set value 7 levels) Default
value: 8
✔
-
✔
✔
Image rotation
0°/180°Default setting: 0°
（The image rotation function is not available
when the image freeze function is used.）
✔
LED lighting
ON/OFF Default setting: OFF
✔
-
-
-
AF（focus）
Manual（One-push）
✔
-
-
-
Zoom
Possible (from x1 to x16) Default
setting: x1
✔
Image pause
Possible
✔