Elmo st-I200 - Take-Up Guide

4. TAKE-UP GUIDE (Fig.4)
Fig. 4
DISASSEMBLY
1. Take out attaching screws (Fig.4-1,x2) and remove Film guide 4.
2. Take out attaching screw (Fig.4-2) and remove Take-up guide roller 1.
3. Take out Take-up guide shaft (Fig.4-3) and remove Take-up guide and Take-up lock spring.
4. Take out attaching screw (Fig.4-4) and remove Release switch presser.
ASSEMBLY
1. As to the assembling, follow the reverse way of the above steps.
2. All the rollers should rotate smoothly.
- 4 -