58 BA-en-3041-2008_PC
4.4.2.2.4 Highlight Values
Press the "Highlight Values" button.
Screen for configuring the "Parameters / Status".
Adjustable actual values are displayed based on the user’s access autho-
rization. Select the parameters and confirm with OK. Press “Cancel” to
cancel the changes and preserve the old settings.
4.4.2.2.5 Factory Settings
Press the "Factory Settings" button.
When the "Factory Settings" button is pressed (see Chapter 4.4.2.2 "Con-
figuration”), all parameters are loaded into the generator after a query and
their confirmation. Press "Cancel" to cancel the changes and preserve the
old settings.
Fig. 40:
Highlight Values
B00349
To Next Page
Loading...
