84 BA-en-3041-2008_PC
A. Assembly of the plugs
A.1 Plug M16 for 24 V DC supply voltage
straight version, version with shield clamping ring
1. Bead pressing screw, pinch ring, seal, distance shell and first shield
clamping ring on cable.
2. Strip wires, widen shild and bead second shild clamping ring.
3. Solder wires, snap distance shell, push the two shield clamping rings
together and cutt off projecting shielding braid.
4. Assemble remaining parts according to figure.
Fig. 47:
Plug
M16 for 24 V DC
supply voltage
Z-116136y
To Next Page
Loading...
