42 BA-en-3041-2008_PC
4.4 Integrated control elements
Settings at the high voltage generator are made via the integrated control
elements. Error and warning messages can be acknowledged directly at
the device.
Depending on the generator variant, the operator can use the integrated
membrane keyboard or a touchscreen.
4.4.1 Using the membrane keyboard
The membrane keyboard is used to set certain parameters and the set-
point and to acknowledge error and warning messages.
Description of buttons
• +
Used to change settings
• -
Used to change settings
• kV / mA
Used to change the indicator mode of the LED bar
• Setup
Activates the Setup Menu
• OK
Confirms the setting
• ON/OFF
Switches the high voltage output ON and OFF
Fig. 20:
Membrane
keyboard
Z-116036ay_11
To Next Page
Loading...
