78 BA-en-3041-2008_PC
Connections, interfaces
High voltage output
Analog interface
2 high voltage connections for the direct connection of two
consumers
Floating input for external high voltage release (24 V DC)
Input setpoint: 0…10 V resp. 0 - 20 mA
Output actual value: 0…20 mA
Fault signal contact: max. 24 V DC ±20% / 50 mA
internal protection
24 V DC-output: max. 24 V DC ±20% / 50 mA)
internal protection
Connections, interfaces
(optional)
CANopen®
ModbusTCP
supported baud rates:
10 kBit/s, 20 kBit/s, 50 kBit/s, 125 kBit/s,
250 kBit/s, 500 kBit/s, 800 kBit/s, 1000 kBit/s
supported transmission rates:
10 / 100 MBit/s
as shown on
applicance
marking:
To Next Page
Loading...
