ELTEX SMG-4 - Page 138

138 SMG digital gateway
<PROFILE ID>
0-65535
PROFILE ID = 0 means that the profile is
not used
set vlan
<VLAN_IDX>
<PROFILE ID>
VLAN1…VLAN8
0-65535
Assign a rule to a VLAN
PROFILE ID = 0 means that the profile is
not used
show config
Show configuration
show interfaces
Show interface parameters
show system
Show system parameters
4.3.10.1 FTP Configuration Mode
To enter this mode, execute the ftpd command in the configuration mode.
SMG4-[CONFIG]> ftpd
Entering ftpd mode.
SMG4-[CONFIG]-[FTPd]>
Command
Parameter
Value
Action
?
Show the list of available commands
config
Return to the Configuration menu
exit
Return from this configuration submenu
to an upper level
quit
Terminate this CLI session
set enable
<EN>
on/off
Enable/disable the FTP server
set port
<PORT>
1-65535
Specify a port for the FTP server
set interface
<IFACE_NAME>
String, 255 characters
max.
Specify a network interface for the FTP
server
set timeout idle
<TIME>
0-600
Set an idle timeout, in seconds
set timeout login
<TIME>
0-600
Set an authorisation timeout, in seconds
set timeout session
<TIME>
0-600
Set a session timeout, in seconds
show config
Show FTP server configuration
show user
Show user configuration
user add
<USER_NAME>
<PASSWD>
<CDR_ACCESS>
<LOG_ACCESS>
<MNT_ACCESS>
no_access
r
w
rw
no_access
r
w
rw
no_access
r
w
rw
Add a user
Specify a name for the new user
Specify a password for the new user
Set access permissions for the CDR
directory
Set access permissions for the LOG
directory
Set access permissions for the MNT
directory
user del
<IDX>
1-4
Remove a user
user modify access
<IDX>
0-4
Modify access permissions for the