ELTEX SMG-4 - Page 152

152 SMG digital gateway
show
Show prefix configuration
stimer
<PFX_LTIMER>
0-255
Set time interval in seconds when the
trunk gateway will wait for further
dialling if the dialled number already
matches a sample in the numbering
schedule, but additional digits may be
also dialled, which will result in a
match to another sample. The default
value: 5 seconds.
trunk
<TRUNK>
0-31
Set a trunk group number
type
<PFX_TYPE>
trunk/trunk-
direction/change-
numplan
Set a prefix type:
trunk—transition to a trunk group;
trunk direction—transition to a trunk
direction;
change-numplan—change the
numbering schedule.
4.3.14.2 Prefix Mask Configuration Mode
To enter this mode, execute the mask edit command in the prefix configuration mode.
SMG4-[CONFIG]-PREFIX[0]> mask edit
Entering Prefix-Mask mode.
SMG4-[CONFIG]-PREFIX[0]-MASK>
Command
Parameter
Value
Action
?
Show the list of available
commands
add
<PREFIX_MASK>
[PFX_MASK_TYPE]
A prefix mask.
255 characters max.,
should be enclosed in
parentheses "(" and
")"
calling/called [called]
Add a new mask into the prefix. A
mask can be specified—for a caller
("calling") or a callee ("called");
the default mask type is always
"called".
config
Return to the Configuration menu
history
Show the history of entered
commands
exit
Return from this configuration
submenu to an upper level
modify duration
<PREFIX_MASK_INDEX>
<DURATION>
0-1024
0-255
Set a timer for number dialling
duration:
PREFIX_MASK_INDEX—mask
number;
DURATION—the timer.
modify Ltimer
<PREFIX_MASK_INDEX>
<LONG_TIMER>
0-1024
0-255
Set a long timer:
PREFIX_MASK_INDEX—mask
number;
LONG_TIMER—the timer.
modify mask
<PREFIX_MASK_INDEX>
0-1024
Modify a mask: