ELTEX SMG-4 - Page 89

SMG digital gateway 89
and VPN/PPTP interfaces are established. These routes are required for normal operation of the interfaces.
To create, edit, or remove a route, use the Objects—Add Object, Objects—Edit Object, or Objects—
Remove Object menus and the following buttons:
— Add Route;
— Edit Route Parameters;
— Remove Route.
Route Parameters
 Enable—when checked, enables the route.
 Destination—an IP network, an IP address or the default value (to set a default gateway).
 Mask—specifies a network mask for the defined IP network (use mask 255.255.255.255 for IP
address).
 Gateway (IP address or
*
)—defines an IP address of the route gateway.
 Interface—the selected network transmission interface.
 Metric—route metrics.
4.1.8.10 Network Settings
This submenu can be used to specify a device name and to
change the network gateway address, the DNS server address, and the
SSH/Telnet access ports.
Device Network Parameters
 Hostname—device network name.
 Use gateway from—network gateway address for the device.
 Primary DNS—primary DNS server.