EMC
®
VNX
™
Procedure Generator
EMC CONFIDENTIAL version: 4.5
10 of 51
EMC_PRODUCT_SERIAL_NUMBER="FCNCH095103338 "
VENDOR_NAME="Blank "
LOCATION_OF_MANUFACTURE="Blank "
YEAR_OF_MANUFACTURE=" "
MONTH_OF_MANUFACTURE=" "
DAY_OF_MONTH_OF_MANUFACTURE=" "
ASSEMBLY_NAME=" "
/>
Table 2 Resume PROM information
RESUME_INFORMATION_MIDPLANE
field name
Value Corresponding Resume PROM Field
EMC_PART_NUMBER EMC SYSTEM HARDWARE TLA PN
EMC_ASSEMBLY_REVISION EMC SYSTEM HARDWARE TLA Rev
EMC_SERIAL_NUMBER EMC SYSTEM HARDWARE TLA SN
EMC_PRODUCT_PART_NUMBER PRODUCT PN
EMC_PRODUCT_SERIAL_NUMBER PRODUCT SN
ASSEMBLY_NAME ASSEMBLY_NAME
Note 1: All of this information except the ASSEMBLY_NAME should also be on the serial number tag located on the rear of the BE
enclosure.
Note 2: The field names listed in Corresponding Resume PROM Field correspond to the value prompts found in Configure the
BE Resume PROM.
Note: The CE should contact support and get the Resume PROM configuration data from CSI if not
available locally.
3. [ ] The Resume PROM values for the faulted BE have been collected.
To Next Page
Loading...
