Figure 3-51: Graph
3.27 Disconnect a device
Prerequisites
Before you disconnect the Trex unit from a device, resolve any unsent data to the device.
Procedure
Tap Menu → Disconnect or remove the lead set from the device or the Trex unit.
The Trex unit detects the loss of voltage or current and stops communicating with the
device. If the Trex unit was powering the device, the Trex unit stops providing power when
the lead set is removed. The Connect - Select screen is displayed.
User Guide Field Communicator application
September 2021
User Guide 123
w ww . . co m
information@itm.com1.800.561.8187
To Next Page
Loading...
Need help?
General
