Emerson AMS Trex Device Communicator User Manual

Related information
Enable local security for a Trex unit
2.15.5 Delete a local user
Procedure
1. Log in to the Trex unit using the local administrator account.
2. Tap Settings.
3. Tap Security Management.
4. Tap Remove user.
5. Select a user.
6. Tap Yes.
2.15.6 Reset the password of a local user
Procedure
1. Log in to the Trex unit using the local administrator account.
2. Tap Settings.
3. Tap Security Management.
4. Tap Reset Password.
5. Select a user.
6. Tap Yes.
Note
The user will be prompted to enter a new password on the next login.
2.15.7 Pair an NFC card to a user
Prerequisites
Local or enterprise security must be enabled on the Trex unit.
Procedure
1. Log in to the Trex unit.
2. Tap Settings.
3. Tap Security Management.
4. Tap Pair NFC card.
5. Tap the NFC card on the navigation buttons of the Trex unit to scan it.
6. Enter a 4-digit PIN code.
7. Tap OK.
Related information
Enable local security for a Trex unit
User Guide AMS Trex Device Communicator overview
September 2021
User Guide 49
w ww . . co m
information@itm.com1.800.561.8187

Emerson AMS Trex Device Communicator Specifications

General

Brand	Emerson
Model	AMS Trex Device Communicator
Category	Cell Phone
Language	English