Device connection wizard prompts Answer
Do you intend to provide power from the Trex unit?
No
Leads are attached to:
Positioner
Change Polling Option? Tap Yes and select 63.
3.10.4 HART Device List
The Device List displays the devices that the Trex unit has detected. Each device is listed by
its tag and address. The Device List will not display when the Auto-Connect option for the
Field Communicator application is enabled and a device was found at address zero.
Tap a device displayed on the Device List to connect to it.
If a device is not listed, tap My Device Not Found to change the HART polling options.
Figure 3-23: HART Device List
Field Communicator application User Guide
September 2021
80 User Guide
w ww . . co m
information@itm.com1.800.561.8187