Emerson AMS Trex Device Communicator - Trex Unit Hard Shutdown; Trex Unit Home Screen

2. Tap More → Power Management → Reboot.
2.8.2 Hard shut down
If the Trex unit is unresponsive, do a hard shut down and then restart the Trex unit. Do not
use this as your normal shut down method. Contact technical support if you need to
repeatedly use the hard shut down.
Procedure
Press and hold the power button for 12 seconds.
The Trex unit shuts down.
2.9 Home screen
The Home screen appears after you power on the Trex unit. The Home screen displays the
installed applications and the status bar at the top of the screen. The Home screen may
display one or more of the applications listed below.
Figure 2-14: Home screen
User Guide AMS Trex Device Communicator overview
September 2021
User Guide 27
w ww . . co m
information@itm.com1.800.561.8187