Emerson AMS Trex Device Communicator User Manual

6. Insert and tighten the two screws. Do not over tighten the screws. Use 0.5Nm
maximum torque load.
2.17.2 Calibration
Calibration is not supported on the AMS Trex Device Communicator. Voltage, current,
signal, and noise measurements made by the Trex unit are intended for troubleshooting
purposes. NIST standards are not applicable to the AMS Trex Device Communicator.
User Guide AMS Trex Device Communicator overview
September 2021
User Guide 51
w ww . . co m
information@itm.com1.800.561.8187

Emerson AMS Trex Device Communicator Specifications

General

Brand	Emerson
Model	AMS Trex Device Communicator
Category	Cell Phone
Language	English