Epsilon Eb Digital Servo Drive Installation Manual
• Encoder chassis and electrical connector
A good rule to follow when specifying conductors for high
frequency applications is to use a metal strap with a length to
width ratio that is less than 3:1.
AC Line Filters
The AC line filters used during EMERSON Motion Control’s
compliance testing are listed below. These filters are capable of
supplying the drive input power to the specified drive under
maximum output power conditions.
Alternately, EMERSON Motion Control has also seen good
results with the following line filters:
AC Line Filter Installation Notes
• EMC criteria can be met in installations where multiple
drives are supplied through a single filter, however, it is the
installers responsibility to verify EMC compliance.
Questions on this subject should be directed to the filter
manufacturer.
Epsilon E Series Schaffner Part # EMERSON Part # Rating
Eb-202, Eb-203*
FN2070-10/08 960307-01 10A, 240V, 1 Ø
EN-204 FS5278-16/08 960305-01
16A, 240V, 1 Ø
Eb-205 EN-208 FS5278-16/08 960305-01
EN-214 FN-258/16 960304-01 16A, 480V, 3 Ø
Drive Part # Rating
EN-204
Corcom 20EQ1 20A, 240V, 1 ØEN-208
Eb-202, Eb-203, Eb-205
Eb-202 Schaffner FN 2070-6-06 6A, 240V, 1 Ø
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
