Controller Info Navigating Visograph Display • 19
Pressing SAVE will apply the changes made and the
system will reboot.
Once the I/O Module has booted back up, it is ready for
connection to E2E.
3.4 Controller Info
From the Main Menu, use the T6 key to arrow down to
2. Controller Info and press T5 SET to enter. The
Controller Info screen has information about the current
application version and build date.
App Version
This field gives the version of the application that is
currently running on the PLC.
Build Date
This field gives the build date of the application that is
currently running on the PLC.
BAS Comm
This field gives the status of communication between the
I/O Module and the BAS system.
Figure 3-11 - Reboot BACnet Settings
Figure 3-12 - Visograph Controller Info
To Next Page
Loading...
