Chapter 5 iCOM Controller 37
Liebert. PEX+Series Precision Air Conditioner User Manual
The WELLNESS menu includes nine groups of parameters, including WELLNESS BASICs, and WELLNESS MOTOR,
WELLNESS COMPs, WELLNESS HEATs and WELLNESS HUM. See Table 5-13 ~ Table 5-22 for detailed parameter
descriptions.
WELLNESS BASIC1
Table 5-13 Descriptions of WELLNESS BASIC1 parameters
Maintenance frequency every year
Last maintenance. Year (YY), month (MM) and day (DD). This
parameter is read only
WELLNESS BASIC2
Table 5-14 Descriptions of WELLNESS BASIC2 parameters
Service personnel setting
Maintenance confirmation selection
Calculated next maintenance. This parameter is read only
WELLNESS MOTOR
Table 5-15 Descriptions of WELLNESS MOTOR parameters
Number of fan starts since the last maintenance
Fan run hours since the last maintenance
Average fan run time calculated through number of fan starts and run hours
Number of alarms since the last maintenance
Bonus amount. Actual bonus calculated through the number of starts and average run time.
This value determines the time for the next maintenance
WELLNESS COMP1
Table 5-16 Descriptions of WELLNESS COMP1 parameters
Number of compressor 1 starts since the last maintenance
Compressor 1 run hours since the last maintenance
Average compressor 1 run time calculated through the number of starts and run hours
Number of high pressure alarms occurred to compressor 1 since the last maintenance
Number of low pressure alarms occurred to compressor 1 since the last maintenance
Number of overload alarms occurred to compressor 1 since the last maintenance
Number of digital scroll high temperature alarms occurred to compressor 1 since the last
maintenance
Bonus amount. Actual bonus calculated through the number of starts and average run time.
This value determines the time for the next maintenance
WELLNESS COMP2
Table 5-17 Descriptions of WELLNESS COMP2 parameters
Number of compressor 2 starts since the last maintenance
Compressor 2 run hours since the last maintenance
Average compressor 2 run time calculated through the number of starts and run hours